= Xorg.conf = * Jos olet nvidian näytönohjaimen omistaja, suosittelen asentamaan ajurin ''nvidia-glx'' (ohjeet ubuntu tutuksi wikikirjassa) ja käyttämään asetusten säätöön ''nvidia-settings'' ohjelmaa * Katso myös vastaava artikkeli Linux.fi-wikissä: [[http://linux.fi/index.php/X.orgin_asetukset|X.orgin asetukset]] Näyttötilaa eli näytön resoluutiota ja virkistystaajuutta voi säätää valikosta Järjestelmä > Asetukset > Näytön tarkkuus. * Jos näytön resoluutiota tai virkistystaajuutta ei pysty säätämään, tai jos vain muuten tarvitsee säätää näytön asetuksia , niin ehkä helpoin tapa on kirjoittaa komentoriviin: sudo dpkg-reconfigure xserver-xorg Ensin kannattaa kuitenkin tehdä varmuuskopio xorg.conf-tiedostosta jota ko. ohjelma muokkaa, komennolla {{{ sudo cp /etc/X11/xorg.conf /etc/X11/xorg.bup }}} (sudo=suorita pääkäyttäjänä cp=kopioi) Jos kone ei jostain syystä toimi asetusten säätämisen jälkeen, niin vanhan xorg.conf:in saat takaisin kirjoittamalla komentoriviin: {{{ sudo cp /etc/X11/xorg.bup /etc/X11/xorg.conf }}} * Ohjelmaan tulee muutaman kohdan jälkeen valikko, josta voi valita Advanced Medium Easy. * Kun valitsee Medium-nappulan se kysyy suurinta näyttötilaa ja virkistystaajuutta johon näyttö pystyy (omassa näytössä 1280x1024 60Hz). * Kun ohjelman kaikki kohdat on käynyt läpi, niin käynnistä Ubuntu uudelleen. * Ubuntu käynnistyy suurimpaan resoluutioon, jonka valitsit ohjelmassa. * Sen jälkeen voi valita Näytön tarkkuus-ohjelmasta mieleisensä näyttötilan. Nvidia TwinView / Kaksi näyttöä tai tv out (s-video tai composite) Tee varmuuskopio xorg.conf-tiedostosta jota muokkaat, komennolla sudo cp /etc/X11/xorg.conf /etc/X11/xorg.bup (Vanhan xorg.conf:in saat takaisin kirjoittamalla komentoriviin: sudo cp /etc/X11/xorg.bup /etc/X11/xorg.conf) Kirjoita komentoriviin: sudo gedit /etc/X11/xorg.conf (Avaa tekstinkäsittelyohjelman) Etsi tiedostosta Device-kohta (Huom. esimerkki) Ennen: {{{ Section "Device" Identifier "NVIDIA Corporation NV34 [GeForce FX 5200]" Driver "nvidia" BusID "PCI:1:0:0" EndSection }}} Lisää tiedostoon DEVICE kohtaan seuraava teksti: {{{ Option "TwinView" "true" Option "TwinViewOrientation" "Clone" Option "TVOutFormat" "COMPOSITE" Option "TVStandard" "PAL-B" Option "SecondMonitorHorizSync" "30-50" Option "SecondMonitorVertRefresh" "60" Option "MetaModes" "1024x768,1024x768;800x600,800x600;640x480,640x480; 512x384,512x384" }}} Vaihtoehdot: TVOutFormat "COMPOSITE" tai "S-VIDEO" TVStandard "PAL-B" (Suomi) tai "NTSC-M" SecondMonitorHorizSync '''Vaakasuuntainen''' Voit vaihtaa tähän näyttösi/tv:si taajuudet, löytyvät ohjekirjasta SecondMonitorVertSync '''Pystysuuntainen''' Muokkauksen jälkeen (Huom.esimerkki) {{{ Section "Device" Identifier "NVIDIA Corporation NV34 [GeForce FX 5200]" Driver "nvidia" BusID "PCI:1:0:0" Option "TwinView" "true" Option "TwinViewOrientation" "Clone" Option "TVOutFormat" "S-VIDEO" Option "TVStandard" "PAL-B" Option "SecondMonitorHorizSync" "30-69" Option "SecondMonitorVertRefresh" "50-75" Option "MetaModes" "1360x768,1360x768;1024x768,1024x768;800x600,800x600;640x480,640x480; 512x384,512x384" EndSection }}} https://wiki.ubuntu.com/NvidiaTVOut ---- . Käyttäessäsi laajakuvanäyttöä (lcd) joka ei hyväksy kaikkia näyttötiloja SIGNAALI EI KELPAA * Jos ubuntu on asennettu ja tulee SIGNAALI EI KELPAA: * Ctrl+Alt+f1 * Kirjaudu sisään * kirjoita sudo dpkg-reconfigure xserver-xorg * Mene eteenpäin siihen asti kun tulee näyttötilalista. * Ota rasti pois 1280x1024 * Laita rasti 1280x768 * OK * Sitten jossain vaiheessa kysytään: Simple Medium Advanced -> Valitse Advanced * Vastaa kysymyksiin, Horizontal=vaakasuuntainen, Vertical=pystysuuntainen (Löytyvät näytön ohjekirjasta) * Sitten kun pääset pois ohjelmasta komenna: * sudo reboot * Jvc 20" laajakuva näyttää näyttötilaksi 1360x768 vaikka ubuntu 1280x768 Ubuntu foorumin(en) ohjeita: http://ubuntuforums.org/showthread.php?p=454217 UbuntuSuomi wikikirja: http://fi.wikibooks.org/wiki/Ubuntu_tutuksi ---- '''''Tietoa xorg.conf-tiedostosta:''''' {{{ 'Tietoa xorg.conf-tiedostosta:' # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following commands: # # cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom # sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum' ' # sudo dpkg-reconfigure xserver-xorg Section "Files" FontPath "unix/:7100" # local font server # if the local font server has problems, we can fall back on these FontPath "/usr/share/X11/fonts/misc" FontPath "/usr/share/X11/fonts/cyrillic" FontPath "/usr/share/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/X11/fonts/Type1" FontPath "/usr/share/X11/fonts/CID" FontPath "/usr/share/X11/fonts/100dpi" FontPath "/usr/share/X11/fonts/75dpi" # paths to defoma fonts FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID" EndSection Section "Module" (Ubuntun käynistyksessä käynistyvät palvelut/moduulit) Load "GLcore" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "type1" Load "vbe" EndSection Section "InputDevice" (Näppäimistön asetukset) Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "fi" EndSection Section "InputDevice" (Hiiren asetukset) Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Device" Identifier "NVIDIA Corporation NV34 [GeForce FX 5200]" Driver "nvidia" "Nv" on geneerinen opensource NVIDIA:n ajuri ja "nvidia" on NVIDIA:n virallinen ajuri. Jotta nvidia ajuri toimi täytyy nvidia-glx paketti olla asennettu. BusID "PCI:1:0:0" EndSection Section "Monitor"' ' Identifier "Generic Monitor" Option "DPMS" (DPMS Display Power Management Signaling / virransäästö) HorizSync 30-68 VertRefresh 50-70 Horizontal ja Vertical Synchronization löytyvät näytön ohjekirjasta tai valmistajan kotisivuilta EndSection Section "Screen" Identifier "Default Screen" Device "NVIDIA Corporation NV34 [GeForce FX 5200]" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Section "DRI" Mode 0666 EndSection }}}