LTSP5 - openLDAP

Tämä ohje on tarkoitettu Ubuntu 8.04.1-versiolla. Ohje perustuu asennukseen, joka tehtiin Valamossa LTSP5-työpajassa tammikuussa 2009. Asennuksen teki Mikael Lammentausta.

Tämä ohje ei ole leikkaa-liimaa-tyyppinen, vaan pikemminkin mahdollisimman tarkka kuvaus yhdestä toimivasta LTSP5-openLDAP-palvelinyhdistelmästä.
Toivomme, että lähtien liikkeelle tästä peruskuvauksesta saamme luoduksi monipuolisen ohjeen koskien openLDAP-käyttöä LTSP5-ympäristössä.

Tässä ohjeessa edellytetään, että käytössä on kaksi palvelinkonetta, jossa ensimmäiseen on ensin asennettu täysin toimiva LTSP5-ympäristö. Toiseen koneeseen riittää pelkkä Ubuntu 8.04.1-asennus. Näissä kahdessa palvelinkoneessa on yksi verkkokortti kummassakin. Perusasennuksen jälkeen tässä ohjeessa on käytössä seuraavanlaista lähiverkkoa. LTSP5-perusasennuksesta, tosin kahdella verkkokortilla, löytyy oma ohjeensa: http://wiki.ubuntu-fi.org/LTSP5_Perusasennus.

http://www.arkki.info/howto/Wiki/LTSP5-openLDAP/LTSP5-openLDAP.gif

ADSL-modeemi jakaa LAN-reitittimelle/kytkimelle ip-osoitteen (192.168.0.100). Lähiverkkoon päin LAN-reititin/kytkin näkyy ip-osoitteessa 192.168.1.1. Tämä LAN-reititin/kytkin tarjoaa myös nimipalvelut.

Palvelin, jossa on LTSP5-ympäristö, on 192.168.1.101.

Palvelin, jossa on openLDAP, on 192.168.1.102.

Pääte, jolle on annettu kiinteä ip-osoite MAC-osoitteen perusteella, on 192.168.1.200. Pääte myös kirjautuu automaattisesti.

Lähiverkon perusasetukset

Tässä ohjeessa on käytetty seuraavanlaisia asetustiedostoja.

LTSP5-palvelin, verkkoasetukset - 192.168.1.101

root@ubuntu:~# cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
        address 192.168.1.101
        netmask 255.255.255.0
        network 192.168.1.0
        broadcast 192.168.1.255
        gateway 192.168.1.1
        # dns-* options are implemented by the resolvconf package, if installed
        dns-nameservers 192.168.1.1
root@ubuntu:~#

root@ubuntu:~# cat /etc/ltsp/dhcpd.conf
#
# Default LTSP dhcpd.conf config file.
#

authoritative;

subnet 192.168.1.0 netmask 255.255.255.0 {
    range 192.168.1.150 192.168.1.200;
    option domain-name "ubuntu";
    option domain-name-servers 192.168.1.1;
    option broadcast-address 192.168.1.255;
    option routers 192.168.1.1;
#    next-server 192.168.0.1;
#    get-lease-hostnames true;
    option subnet-mask 255.255.255.0;
    option root-path "/opt/ltsp/i386";
    if substring( option vendor-class-identifier, 0, 9 ) = "PXEClient" {
        filename "/ltsp/i386/pxelinux.0";
    } else {
        filename "/ltsp/i386/nbi.img";
    }

host ltsp001 {
        hardware ethernet 00:22:15:15:4B:4C;
        fixed-address 192.168.1.200;
        }
}
root@ubuntu:~#

root@ubuntu:~# cat /var/lib/tftpboot/ltsp/i386/lts.conf
[00:22:15:15:4B:4C]
X_CONF = /etc/X11/asus-eee-xorg.conf
X_COLOR_DEPTH=16
LDM_DIRECX=True
LDM_AUTOLOGIN=True
LDM_USERNAME=ltsp001
LDM_PASSWORD=edubuntu
root@ubuntu:~#

root@ubuntu:~# cat /etc/ldap/ldap.conf
###############
# LDAP Defaults
#

# See ldap.conf(5) for details
# This file should be world readable but not world writable.

BASE    dc=ubuntu,dc=fi
URI     ldap://192.168.1.102

root@ubuntu:~#

root@ubuntu:~# cat /etc/ldap.conf
###DEBCONF###
##
## Configuration of this file will be managed by debconf as long as the
## first line of the file says '###DEBCONF###'
##
## You should use dpkg-reconfigure to configure this file via debconf
##

# The distinguished name of the search base.
base dc=ubuntu,dc=fi

# Another way to specify your LDAP server is to provide an
uri ldap://192.168.1.102

# The LDAP version to use (defaults to 3
# if supported by client library)
ldap_version 3

# The distinguished name to bind to the server with
# if the effective user ID is root. Password is
# stored in /etc/ldap.secret (mode 600)
rootbinddn cn=manager,dc=ubuntu,dc=fi

# Do not hash the password at all; presume
# the directory server will do it, if
# necessary. This is the default.
pam_password md5

nss_initgroups_ignoreusers avahi,avahi-autoipd,backup,bin,daemon,dhcp,dhcpd,games,gdm,gnats,haldaemon,hplip,irc,klog,libuuid,list,lp,mail,man,messagebus,nbd,news,ntp,nx,polkituser,proxy,pulse,root,sshd,statd,sync,sys,syslog,uucp,www-data

root@ubuntu:/etc#

root@ubuntu:/etc# cat ldap.secret
TP2009ltsp
root@ubuntu:/etc#

openLDAP-palvelin, verkkoasetukset - 192.168.1.102

root@ubuntu:~# cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
        address 192.168.1.102
        netmask 255.255.255.0
        network 192.168.1.0
        broadcast 192.168.1.255
        gateway 192.168.1.1
        # dns-* options are implemented by the resolvconf package, if installed
        dns-nameservers 192.168.1.1
root@ubuntu:~#

openLDAP-asetustiedostot

openLDAP-puurakenne

 dc=fi
 |
 dc=ubuntu----|
 |            |
 ou=Users     ou=Groups
 |            |          
 |            cn=users
 |
 cn=ltsp001 ...

Näistä tiedostoista on poistettu osa kommenttiriveistä, #-merkillä alkavat, luettavuuden parantamiseksi.

LTSP5-palvelimen pääkäyttäjän tunnus on itse palvelimella eli passwd-tiedostossa.

root@ubuntu:~# cat /etc/passwd
root:x:0:0:root:/root:/bin/bash
[--]
admin-ubuntu:x:1000:1000:Administrator Ubuntu,,,:/root/admin-ubuntu:/bin/bash
[--]
root@ubuntu:~#

/etc/ldap/slapd.conf

Tämä konfiguraatiotiedosto määrittää LDAP-palvelimen asetukset. Konfiguraatio mm. sisältää LDAPin hallinnoijan tunnuksen (rootdn) sekä salasanan kryptatussa muodossa.

root@ubuntu:~# cat /etc/ldap/slapd.conf
####################
# Global Directives:

# Schema and objectClass definitions
include         /etc/ldap/schema/core.schema
include         /etc/ldap/schema/cosine.schema
include         /etc/ldap/schema/nis.schema
include         /etc/ldap/schema/inetorgperson.schema

pidfile         /var/run/slapd/slapd.pid

argsfile        /var/run/slapd/slapd.args

loglevel        none

modulepath      /usr/lib/ldap
moduleload      back_hdb

sizelimit 500

tool-threads 1

######################################
# Specific Backend Directives for hdb:
# Backend specific directives apply to this backend until another
# 'backend' directive occurs
backend         hdb

###################################################
# Specific Directives for database #1, of type hdb:
# Database specific directives apply to this databasse until another
# 'database' directive occurs
database        hdb

# The base of your directory in database #1
suffix          "dc=ubuntu,dc=fi"

# rootdn directive for specifying a superuser on the database. This is needed
# for syncrepl.
rootdn          "cn=manager,dc=ubuntu,dc=fi"

# Where the database file are physically stored for database #1
directory       "/var/lib/ldap"

password-hash   {crypt}
rootpw {MD5}gonsh+ULQWhKd6JXdMo4kQ==

# For the Debian package we use 2MB as default but be sure to update this
# value if you have plenty of RAM
dbconfig set_cachesize 0 2097152 0

# Number of objects that can be locked at the same time.
dbconfig set_lk_max_objects 1500

# Number of locks (both requested and granted)
dbconfig set_lk_max_locks 1500

# Number of lockers
dbconfig set_lk_max_lockers 1500

# Indexing options for database #1
index           objectClass eq

# Save the time that the entry gets modified, for database #1
lastmod         on

# Checkpoint the BerkeleyDB database periodically in case of system
# failure and to speed slapd shutdown.
checkpoint      512 30

# Where to store the replica logs for database #1
# replogfile    /var/lib/ldap/replog

# The userPassword by default can be changed
# by the entry owning it if they are authenticated.
# Others should not be able to see it, except the
# admin entry below
# These access lines apply to database #1 only
access to attrs=userPassword,shadowLastChange
        by dn="cn=manager,dc=ubuntu,dc=fi" write
        by anonymous auth
        by self write
        by * none

# Ensure read access to the base for things like
# supportedSASLMechanisms.  Without this you may
# have problems with SASL not knowing what
# mechanisms are available and the like.
# Note that this is covered by the 'access to *'
# ACL below too but if you change that as people
# are wont to do you'll still need this if you
# want SASL (and possible other things) to work 
# happily.
access to dn.base="" by * read

# The admin dn has full write access, everyone else
# can read everything.
access to *
        by dn="cn=manager,dc=ubuntu,dc=fi" write
        by * read

root@ubuntu:~#

/root/base.ldif

Tämä tiedosto sisältää juurirakenteen (sekä yhden testikäyttäjän). Missä komento jolla se ladataan? Voiko latauksen tai rakenteen määrityksen tehdä webminillä?

root@ubuntu:~# cat /root/base.ldif
dn: dc=ubuntu,dc=fi
objectclass: organization
objectclass: dcObject
o: LTSP-paja
dc: ubuntu
description: LTSP-tyopajan oma domain

dn: ou=Hosts,dc=ubuntu,dc=fi
ou: Hosts
objectClass: top
objectClass: organizationalUnit
objectClass: domainRelatedObject
associatedDomain: paja

dn: ou=People,dc=ubuntu,dc=fi
ou: People
objectClass: top
objectClass: organizationalUnit
objectClass: domainRelatedObject
associatedDomain: paja

dn: ou=Groups,dc=ubuntu,dc=fi
ou: Groups
objectClass: top
objectClass: organizationalUnit
objectClass: domainRelatedObject
associatedDomain: paja

dn: uid=ltsp001,ou=People,dc=ubuntu,dc=fi
objectClass: inetOrgPerson
objectClass: posixAccount
objectClass: shadowAccount
uid: ltsp001
sn: Doe
givenName: John
cn: John Doe
displayName: John Doe
uidNumber: 1000
gidNumber: 10000
userPassword: edubuntu
gecos: John Doe
loginShell: /bin/bash
homeDirectory: /home/ltsp001
shadowExpire: -1
shadowFlag: 0
shadowWarning: 7
shadowMin: 8
shadowMax: 999999
shadowLastChange: 10877
mail: john.doe@example.com
postalCode: 31000
l: Valamo
o: LTSP-paja
mobile: +33 (0)6 xx xx xx xx
homePhone: +33 (0)5 xx xx xx xx
title: Teppo Testaaja
postalAddress: 
initials: JD

dn: cn=users,ou=Groups,dc=ubuntu,dc=fi
objectClass: posixGroup
cn: users
gidNumber: 10000

root@ubuntu:~#

Webmin - webmin-openldap-users.txt

Uusia käyttäjiä voi ladata Webminillä.

create:ltsp001:edubuntu:1001:10000:LTSP 001:/home/ltsp001:/bin/bash:::::
create:ltsp002:edubuntu:1002:10000:LTSP 002:/home/ltsp002:/bin/bash:::::
create:ltsp003:edubuntu:1003:10000:LTSP 003:/home/ltsp003:/bin/bash:::::
create:ltsp004:edubuntu:1004:10000:LTSP 004:/home/ltsp004:/bin/bash:::::
create:ltsp005:edubuntu:1005:10000:LTSP 005:/home/ltsp005:/bin/bash:::::
create:ltsp006:edubuntu:1006:10000:LTSP 006:/home/ltsp006:/bin/bash:::::
create:ltsp007:edubuntu:1007:10000:LTSP 007:/home/ltsp007:/bin/bash:::::
create:ltsp008:edubuntu:1008:10000:LTSP 008:/home/ltsp008:/bin/bash:::::
create:ltsp009:edubuntu:1009:10000:LTSP 009:/home/ltsp009:/bin/bash:::::
create:ltsp010:edubuntu:1010:10000:LTSP 010:/home/ltsp010:/bin/bash:::::
create:ltsp011:edubuntu:1011:10000:LTSP 011:/home/ltsp011:/bin/bash:::::
create:ltsp012:edubuntu:1012:10000:LTSP 012:/home/ltsp012:/bin/bash:::::
create:ltsp013:edubuntu:1013:10000:LTSP 013:/home/ltsp013:/bin/bash:::::
create:ltsp014:edubuntu:1014:10000:LTSP 014:/home/ltsp014:/bin/bash:::::
create:ltsp015:edubuntu:1015:10000:LTSP 015:/home/ltsp015:/bin/bash:::::
create:ltsp016:edubuntu:1016:10000:LTSP 016:/home/ltsp016:/bin/bash:::::
create:ltsp017:edubuntu:1017:10000:LTSP 017:/home/ltsp017:/bin/bash:::::
create:ltsp018:edubuntu:1018:10000:LTSP 018:/home/ltsp018:/bin/bash:::::
create:ltsp019:edubuntu:1019:10000:LTSP 019:/home/ltsp019:/bin/bash:::::
create:ltsp020:edubuntu:1020:10000:LTSP 020:/home/ltsp020:/bin/bash:::::
create:ltsp021:edubuntu:1021:10000:LTSP 021:/home/ltsp021:/bin/bash:::::
create:ltsp022:edubuntu:1022:10000:LTSP 022:/home/ltsp022:/bin/bash:::::
create:ltsp023:edubuntu:1023:10000:LTSP 023:/home/ltsp023:/bin/bash:::::
create:ltsp024:edubuntu:1024:10000:LTSP 024:/home/ltsp024:/bin/bash:::::
create:ltsp025:edubuntu:1025:10000:LTSP 025:/home/ltsp025:/bin/bash:::::
create:ltsp026:edubuntu:1026:10000:LTSP 026:/home/ltsp026:/bin/bash:::::
create:ltsp027:edubuntu:1027:10000:LTSP 027:/home/ltsp027:/bin/bash:::::
create:ltsp028:edubuntu:1028:10000:LTSP 028:/home/ltsp028:/bin/bash:::::
create:ltsp029:edubuntu:1029:10000:LTSP 029:/home/ltsp029:/bin/bash:::::

/etc/ldap/ldap.conf

Tämä konfiguraatio on openLDAP-asiakasta varten (ldapsearch).

root@ubuntu:~# cat /etc/ldap/ldap.conf
###############
# LDAP Defaults
# See ldap.conf(5) for details
# This file should be world readable but not world writable.

BASE    dc=ubuntu,dc=fi
URI     ldap://192.168.1.102

root@ubuntu:~#

/usr/bin/ldapsearch

Testataan saadaanko tietoja palvelimelta.

root@ubuntu:~# ldapsearch -x -D "cn=manager,dc=ubuntu,dc=fi" -W > ldapsearch.txt

# extended LDIF
#
# LDAPv3
# base <dc=ubuntu,dc=fi> (default) with scope subtree
# filter: (objectclass=*)
# requesting: ALL
#

# ubuntu.fi
dn: dc=ubuntu,dc=fi
objectClass: organization
objectClass: dcObject
o: LTSP-paja
dc: ubuntu
description: LTSP-tyopajan oma domain

# Hosts, ubuntu.fi
dn: ou=Hosts,dc=ubuntu,dc=fi
ou: Hosts
objectClass: top
objectClass: organizationalUnit
objectClass: domainRelatedObject
associatedDomain: paja

# People, ubuntu.fi
dn: ou=People,dc=ubuntu,dc=fi
ou: People
objectClass: top
objectClass: organizationalUnit
objectClass: domainRelatedObject
associatedDomain: paja

# Groups, ubuntu.fi
dn: ou=Groups,dc=ubuntu,dc=fi
ou: Groups
objectClass: top
objectClass: organizationalUnit
objectClass: domainRelatedObject
associatedDomain: paja

# users, Groups, ubuntu.fi
dn: cn=users,ou=Groups,dc=ubuntu,dc=fi
objectClass: posixGroup
cn: users
gidNumber: 10000

# ltsp001, People, ubuntu.fi
dn: uid=ltsp001,ou=People,dc=ubuntu,dc=fi
cn: LTSP 001
uid: ltsp001
uidNumber: 1001
loginShell: /bin/bash
homeDirectory: /home/ltsp001
gidNumber: 10000
userPassword:: e2NyeXB0fVNNWEZodUZEeWh2M1k=
shadowLastChange: 14252
objectClass: posixAccount
objectClass: shadowAccount
objectClass: inetOrgPerson
objectClass: person
sn: LTSP 001

# ltsp002, People, ubuntu.fi
dn: uid=ltsp002,ou=People,dc=ubuntu,dc=fi
cn: LTSP 002
uid: ltsp002
uidNumber: 1002
loginShell: /bin/bash
homeDirectory: /home/ltsp002
gidNumber: 10000
userPassword:: e2NyeXB0fUhRbUpjWkxBSFNMNW8=
shadowLastChange: 14252
objectClass: posixAccount
objectClass: shadowAccount
objectClass: inetOrgPerson
objectClass: person
sn: LTSP 002

[--]

# ltsp029, People, ubuntu.fi
dn: uid=ltsp029,ou=People,dc=ubuntu,dc=fi
cn: LTSP 029
uid: ltsp029
uidNumber: 1029
loginShell: /bin/bash
homeDirectory: /home/ltsp029
gidNumber: 10000
userPassword:: e2NyeXB0fVdHbFhRRDZrVmFrTlE=
shadowLastChange: 14252
objectClass: posixAccount
objectClass: shadowAccount
objectClass: inetOrgPerson
objectClass: person
sn: LTSP 029

# search result
search: 2
result: 0 Success

# numResponses: 35
# numEntries: 34

-  ⇤ ← Revision 27 as of 2009-01-22 08:21:47 → 
  Size: 24576
  Editor: AsmoKoskinen
  Comment:
+   ← Revision 29 as of 2009-01-22 08:27:00 → ⇥
  Size: 16211
  Editor: AsmoKoskinen
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 111:
-root@ubuntu:/etc# cat ldap.conf
+root@ubuntu:~# cat /etc/ldap.conf
 Line 120:
-#
# @(#)$Id: ldap.conf,v 1.38 2006/05/15 08:13:31 lukeh Exp $
#
# This is the configuration file for the LDAP nameservice
# switch library and the LDAP PAM module.
#
# PADL Software
# http://www.padl.com
#

# Your LDAP server. Must be resolvable without using LDAP.
# Multiple hosts may be specified, each separated by a 
# space. How long nss_ldap takes to failover depends on
# whether your LDAP client library supports configurable
# network or connect timeouts (see bind_timelimit).
#host 127.0.0.1
-Line 142:
+Line 125:
-# Unix Domain Sockets to connect to a local LDAP Server.
#uri ldap://127.0.0.1/
#uri ldaps://127.0.0.1/   
#uri ldapi://%2fvar%2frun%2fldapi_sock/
# Note: %2f encodes the '/' used as directory separator
-Line 151:
+Line 129:
-# The distinguished name to bind to the server with.
# Optional: default is to bind anonymously.
#binddn cn=proxyuser,dc=padl,dc=com

# The credentials to bind with. 
# Optional: default is no credential.
#bindpw secret
-Line 165:
+Line 135:
-# The port.
# Optional: default is 389.
#port 389

# The search scope.
#scope sub
#scope one
#scope base

# Search timelimit
#timelimit 30

# Bind/connect timelimit
#bind_timelimit 30

# Reconnect policy: hard (default) will retry connecting to
# the software with exponential backoff, soft will fail
# immediately.
#bind_policy hard

# Idle timelimit; client will close connections
# (nss_ldap only) if the server has not been contacted
# for the number of seconds specified below.
#idle_timelimit 3600

# Filter to AND with uid=%s
#pam_filter objectclass=account

# The user ID attribute (defaults to uid)
#pam_login_attribute uid

# Search the root DSE for the password policy (works
# with Netscape Directory Server)
#pam_lookup_policy yes

# Check the 'host' attribute for access control
# Default is no; if set to yes, and user has no
# value for the host attribute, and pam_ldap is
# configured for account management (authorization)
# then the user will not be allowed to login.
#pam_check_host_attr yes

# Check the 'authorizedService' attribute for access
# control
# Default is no; if set to yes, and the user has no
# value for the authorizedService attribute, and
# pam_ldap is configured for account management
# (authorization) then the user will not be allowed
# to login.
#pam_check_service_attr yes

# Group to enforce membership of
#pam_groupdn cn=PAM,ou=Groups,dc=padl,dc=com

# Group member attribute
#pam_member_attribute uniquemember

# Specify a minium or maximum UID number allowed
#pam_min_uid 0
#pam_max_uid 0

# Template login attribute, default template user
# (can be overriden by value of former attribute
# in user's entry)
#pam_login_attribute userPrincipalName
#pam_template_login_attribute uid
#pam_template_login nobody

# HEADS UP: the pam_crypt, pam_nds_passwd,
# and pam_ad_passwd options are no
# longer supported.
#
-Line 242:
+Line 140:
-# Hash password locally; required for University of
# Michigan LDAP server, and works with Netscape
# Directory Server if you're using the UNIX-Crypt
# hash mechanism and not using the NT Synchronization
# service. 
#pam_password crypt

# Remove old password first, then update in
# cleartext. Necessary for use with Novell
# Directory Services (NDS)
#pam_password clear_remove_old
#pam_password nds

# RACF is an alias for the above. For use with
# IBM RACF
#pam_password racf

# Update Active Directory password, by
# creating Unicode password and updating
# unicodePwd attribute.
#pam_password ad

# Use the OpenLDAP password change
# extended operation to update the password.
#pam_password exop

# Redirect users to a URL or somesuch on password
# changes.
#pam_password_prohibit_message Please visit http://internal to change your password.

# RFC2307bis naming contexts
# Syntax:
# nss_base_XXX		base?scope?filter
# where scope is {base,one,sub}
# and filter is a filter to be &'d with the
# default filter.
# You can omit the suffix eg:
# nss_base_passwd	ou=People,
# to append the default base DN but this
# may incur a small performance impact.
#nss_base_passwd	ou=People,dc=padl,dc=com?one
#nss_base_shadow	ou=People,dc=padl,dc=com?one
#nss_base_group		ou=Group,dc=padl,dc=com?one
#nss_base_hosts		ou=Hosts,dc=padl,dc=com?one
#nss_base_services	ou=Services,dc=padl,dc=com?one
#nss_base_networks	ou=Networks,dc=padl,dc=com?one
#nss_base_protocols	ou=Protocols,dc=padl,dc=com?one
#nss_base_rpc		ou=Rpc,dc=padl,dc=com?one
#nss_base_ethers	ou=Ethers,dc=padl,dc=com?one
#nss_base_netmasks	ou=Networks,dc=padl,dc=com?ne
#nss_base_bootparams	ou=Ethers,dc=padl,dc=com?one
#nss_base_aliases	ou=Aliases,dc=padl,dc=com?one
#nss_base_netgroup	ou=Netgroup,dc=padl,dc=com?one

# attribute/objectclass mapping
# Syntax:
#nss_map_attribute	rfc2307attribute	mapped_attribute
#nss_map_objectclass	rfc2307objectclass	mapped_objectclass

# configure --enable-nds is no longer supported.
# NDS mappings
#nss_map_attribute uniqueMember member

# Services for UNIX 3.5 mappings
#nss_map_objectclass posixAccount User
#nss_map_objectclass shadowAccount User
#nss_map_attribute uid msSFU30Name
#nss_map_attribute uniqueMember msSFU30PosixMember
#nss_map_attribute userPassword msSFU30Password
#nss_map_attribute homeDirectory msSFU30HomeDirectory
#nss_map_attribute homeDirectory msSFUHomeDirectory
#nss_map_objectclass posixGroup Group
#pam_login_attribute msSFU30Name
#pam_filter objectclass=User
#pam_password ad

# configure --enable-mssfu-schema is no longer supported.
# Services for UNIX 2.0 mappings
#nss_map_objectclass posixAccount User
#nss_map_objectclass shadowAccount user
#nss_map_attribute uid msSFUName
#nss_map_attribute uniqueMember posixMember
#nss_map_attribute userPassword msSFUPassword
#nss_map_attribute homeDirectory msSFUHomeDirectory
#nss_map_attribute shadowLastChange pwdLastSet
#nss_map_objectclass posixGroup Group
#nss_map_attribute cn msSFUName
#pam_login_attribute msSFUName
#pam_filter objectclass=User
#pam_password ad

# RFC 2307 (AD) mappings
#nss_map_objectclass posixAccount user
#nss_map_objectclass shadowAccount user
#nss_map_attribute uid sAMAccountName
#nss_map_attribute homeDirectory unixHomeDirectory
#nss_map_attribute shadowLastChange pwdLastSet
#nss_map_objectclass posixGroup group
#nss_map_attribute uniqueMember member
#pam_login_attribute sAMAccountName
#pam_filter objectclass=User
#pam_password ad

# configure --enable-authpassword is no longer supported
# AuthPassword mappings
#nss_map_attribute userPassword authPassword

# AIX SecureWay mappings
#nss_map_objectclass posixAccount aixAccount
#nss_base_passwd ou=aixaccount,?one
#nss_map_attribute uid userName
#nss_map_attribute gidNumber gid
#nss_map_attribute uidNumber uid
#nss_map_attribute userPassword passwordChar
#nss_map_objectclass posixGroup aixAccessGroup
#nss_base_group ou=aixgroup,?one
#nss_map_attribute cn groupName
#nss_map_attribute uniqueMember member
#pam_login_attribute userName
#pam_filter objectclass=aixAccount
#pam_password clear

# Netscape SDK LDAPS
#ssl on

# Netscape SDK SSL options
#sslpath /etc/ssl/certs

# OpenLDAP SSL mechanism
# start_tls mechanism uses the normal LDAP port, LDAPS typically 636
#ssl start_tls
#ssl on

# OpenLDAP SSL options
# Require and verify server certificate (yes/no)
# Default is to use libldap's default behavior, which can be configured in
# /etc/openldap/ldap.conf using the TLS_REQCERT setting.  The default for
# OpenLDAP 2.0 and earlier is "no", for 2.1 and later is "yes".
#tls_checkpeer yes

# CA certificates for server certificate verification
# At least one of these are required if tls_checkpeer is "yes"
#tls_cacertfile /etc/ssl/ca.cert
#tls_cacertdir /etc/ssl/certs

# Seed the PRNG if /dev/urandom is not provided
#tls_randfile /var/run/egd-pool

# SSL cipher suite
# See man ciphers for syntax
#tls_ciphers TLSv1

# Client certificate and key
# Use these, if your server requires client authentication.
#tls_cert
#tls_key

# Disable SASL security layers. This is needed for AD.
#sasl_secprops maxssf=0

# Override the default Kerberos ticket cache location.
#krb5_ccname FILE:/etc/.ldapcache

# SASL mechanism for PAM authentication - use is experimental
# at present and does not support password policy control
#pam_sasl_mech DIGEST-MD5
-Line 409:
+Line 141: